Single Door Selection Guide

Hammond Series		1447S	EN4DCS all versions
ABB Controls	Disconnect Switch	Flange operated switch (fusible or non-fusible)
		Shaft: 8-12” dp enclosures, use DSFHS-12; 16” dp enclosures, use DSFHS-17
		Handle: DSFHN-HS4	Handle: n/a
		Door Hardware: n/a
	Circuit Breaker	Circuit breaker: ABB
		Operating Mechanism: see ABB chart
		Shaft: 8-12” dp enclosures, use K7FHD-S12; 16” dp enclosures, use K7FHD-S17
		Handle: K7FHD-HS4	Handle: n/a
		Door Hardware: n/a
Allen Bradley	1494U Flange Disconnect Switch	Disconnect switch and operating mechanism: Bulletin 1494U
		Handle: Bulletin 1494U-W1	Handle: n/a
		Connecting rod: 8-10” dp enclosures, use 1494U-RA1; 12-16” dp enclosures,  use 1494U-RA2
		(except for Hammond part # 1447S46L12, use 1494U-RB2 (2))
		Trailer fuse block kit (if required): Bulletin 1494U
		Fuse kit (if required)
		Line and load connectors (if required)
		Door Hardware: n/a
	1494U Flange Circuit Breaker	Circuit breaker: C-H Westinghouse
		Operating mechanism: Bulletin 1494U
		Handle: Bulletin 1494U-W11	Handle: n/a
		Connecting rod: 8-10” dp enclosures, use 1494U-RA1; 12-16” dp enclosures,  use 1494U-RA2
		Door Hardware: n/a
Cutler Hammer	Type C361 Disconnect Switch	Disconnect switch and operating mechanism
		Handle: C361-H2 or H4	Handle: n/a
		Door Hardware: n/a
	Type C371 Circuit Breaker	Circuit breaker: C-H Westinghouse
		Operating mechanism
		Handle: 150 amp, use C371H2 or H4; 250-600 amp, use C371H6 or H8	Handle: n/a
		Door Hardware: n/a
	C-H Westinghouse Circuit Breaker w/FlexShaft	Circuit breaker
		Complete Flex-Shaft handle mechanism
		Door Hardware: n/a
General Electric	Type STDA Flange Disconnect Switch	Disconnect switch Type QMR or QMW
		Handle: STDA1X	Handle: n/a
		Fuse kit (if required)
		Variable depth operating mechanism
		Door Hardware: n/a
	Type STDA Flange Circuit Breaker	Circuit breaker
		Handle: STDA1X	Handle: n/a
		Variable depth operating mechanism
		Door Hardware: n/a
	Circuit Breaker w/SpectraFlex	Circuit breaker
		Flange Mt. Handle: 150-600 amp, use STDA1X; SK1200, use STDA3X	Handle: n/a
		Breaker mounted mechanism.
		Operating cable
		Door Hardware: n/a
I-T-E Siemens	Max-Flex Flange Disconnect Switch	Disconnect switch: MCS
		Fuse Kit (if required)
		Handle: Flange mount FHOHS4	Handle: n/a
		Switch operator mechanism
		Operating cable (standard 36.0”)
		Door Hardware: n/a
	Max-Flex Flange Circuit Breaker	Circuit breaker
		Pressure wire connectors
		Handle: Flange mount FHOH4	Handle: n/a
		Circuit breaker operator mechanism
		Operating cable: Standard 36"
		Door Hardware: n/a
Square D	Class 9422 Disconnect Switch	Disconnect switch and operating mechanism 9422
		Handle: 1447SN4 use A-1 or A-2; 1447SN4SS use A-2	Handle: n/a
		Door Hardware: n/a
	Class 9422 Circuit Breaker	Circuit breaker
		Operating mechanism: Class 9422
		Handle: 1447SN4 use A-1 or A-2; 1447SN4SS use A-2	Handle: n/a
		Door Hardware: n/a
	Class 9422 “T” Disconnect Switch w/ cable mechanism	Disconnect switch and operating mechanism 9422, Type T
		Handle: 1447SN4 use A-1 or A-2; 1447SN4SS use A-2	Handle: n/a
		Cable mechanism: Class 9422 CFT_O - 3, 5, or 10 foot
		Door Hardware: n/a
	Circuit Breaker w/cable mechanism	Circuit breaker: Square D
		Handle: 1447SN4 use A-1 or A-2; 1447SN4SS use A-2	Handle: n/a
		Door Hardware: n/a

Space Occupied by Disconnect

Note:	"K"	=	8.62	when	"C"	=	8.00
	"K"	=	11.62	when	"C"	=	12.00
	"P"	=	Wiring Space

Disconnects will occupy space on panel shown by dimensions "K", "L" and "M".

Wiring space "P" is available when disconnect is installed in the enclosure.

*The disconnect information and space occupied tables based on data supplied by disconnect manufacturer’s bulletins. Hammond Manufacturing not responsible for dimensional accuracy.

ABB Controls

ABB Controls Disconnect Switches (Flange Mounted Operators)

Fits Enclosure Depth		ABB Switch  Number	Amp		Fuse  Class	Space Occupied		When  K=8.62	When  K=11.62
8	12		Rating	Fuse Clip		L	M	P	P
•	•	OETL-NF30-F	30A	No Fuse	—	4.45	3.78	10.28	13.28
•	•	OETL-NF60-F	60A	No Fuse	—	4.86	3.78	10.09	13.09
•	•	OETL-NF100-F	100A	No Fuse	—	4.86	4.78	9.53	12.53
•	•	OETL-NF175-F	175A	No Fuse	—	7.30	6.49	7.28	10.28
•	•	OETL-NF200-F	200A	No Fuse	—	7.36	7.28	7.28	10.28
•	•	OESA-F30J6-F	30A	30A-600V	J	4.28	6.58	8.61	11.61
•	•	OESA-F60J6-F	60A	60A-600V	J	4.28	6.26	8.61	11.61
•	•	OESA-F100J6-F	100A	100A-600V	J ¹	6.54	7.65	8.17	11.17
			200A ²

¹ J type fuse clips are standard. If 600 V Type “T” fuse clips are desired order T type fuse adaptor kit.
² 200 A available by using non-fusible 200A switch and a trailing fuse block. (consult ABB)   ABB Controls Circuit Breaker (Flange Mounted Operators)

Fits Enclosure Depth			Amp		Space Occupied		When K=8.62	When K=11.62
8	12	ABB Mechanism	Rating	Fuse Type	L	M	P	P
•	•	FHD-M	150A	D	6.92	3.94	9.17	12.17
•	•	FHF-M	15A-225A	E/Q	5.98	4.23	7.72	10.72
•	•	FHF-M	225A	Frame	7.44	4.23	7.72	10.72
	•	FHJ-M	400A	J	9.71	5.62	—	8.77
	•	FHM-M	600A	L	8.28	11.26	—	8.28
	•	FHM-M	800A	M	10.11	11.26	—	7.87

Fits Enclosure Depth		ISOMAX Circuit  Breaker	Amp  Rating	Operating  Mechanism	Fuse  Type	Space Occupied		When  K=4.75	When  K=7.09
8	12					L	M	P	P
•	•	S1N100TL	100A	K2FHD-M	S1	5.30	4.60	9.13	12.13
	•	S3N150TW	150A	K3FHD-M	S3	6.67	5.02		11.53
	•	S3N225TW	225A	K3FHD-M	S3	6.67	5.02		11.53
	•	S4N250BW	250A	K4FHD-M	S4	8.45	5.02		10.00
	•	S5N400TW	400A	K5FHD-M	S5	8.45	6.40		10.00
	•	S6N600TW	600A	K6FHD-M	S6	8.33	10.00		9.33
	•	S6N800TW	800A	K6FHD-M	S6	8.33	10.00		9.33

Charts reference Space Occupied by Disconnect Drawing.  

Allen Bradley

Allen Bradley 1494U Disconnect Switches

Fits Enclosure Depth		Alan Bradley	Amp			Space Occupied		When  K=8.62	When  K=11.62
8	12	Type Number	Rating	Fuse Clip	Fuse Class	L	M	P	P
•	•	DS30	30A	No Fuse	—	3.88	6.62	6.75	9.75
•	•	DS30	30A	30A-250V	H,K,R	5.25	6.62	6.75	9.75
•	•	DS30	30A	30A-600V	H,K,R	8.00	6.62	6.75	9.75
•	•	DS30	30A	30A-600V	J	5.25	6.62	6.75	9.75
•	•	DS30	30A	60A-250V	H,K	6.00	6.62	6.75	9.75
•	•	DS30	30A	60A-600V	H,K	8.50	6.62	6.75	9.75
•	•	DS30	30A	60A-600V	J	5.38	6.62	6.75	9.75
•	•	DS60	60A	No Fuse	—	3.88	6.62	6.62	9.62
•	•	DS60	60A	60A-250V	H,K,R	6.00	6.62	6.62	9.62
•	•	DS60	60A	60A-600V	H,K,R	8.50	6.62	6.62	9.62
•	•	DS60	60A	60A-600V	J	5.38	6.62	6.62	9.62
•	•	DS60	60A	30A-600V	H,K,R	8.00	6.62	6.62	9.62
•	•	DS60	60A	100A-250V	H,K	8.50	6.62	6.62	9.62
•	•	DS60	60A	100A-600V	H,K	10.50	6.62	6.62	9.62
•	•	DS60	60A	100A-600V	J	7.25	6.62	6.62	9.62
•	•	DS100¹	100A	No Fuse	—	3.88	6.62	6.44	9.62
•	•	DS100¹	100A	100A-250V	H,K,R	8.12	6.62	6.44	9.62
•	•	DS100¹	100A	100A-600V	H,K,R	10.12	6.62	6.44	9.62
•	•	DS100¹	100A	100A-600V	J	6.88	6.62	6.44	9.62
•	•	DS100¹	100A	60A-600V	H,K,R	10.12	6.62	6.44	9.62
•	•	DS100¹	100A	60A-600V	J	8.88	6.62	6.44	9.62
	•	DS200¹	200A	No Fuse	—	4.75	7.88	—	8.12
	•	DS200¹	200A	200A-250V	H,K,R	10.88	7.88	—	8.12
	•	DS200¹	200A	200A-600V	H,K,R	13.38	7.88	—	8.12
	•	DS200¹	200A	200A-600V	J	9.50	7.88	—	8.12
	•	DS200¹	200A	100A-600V	H,K,R	12.00	7.88	—	8.12
	•	DS200¹	200A	100A-600V	J	8.75	7.88	—	8.12

1 Series B 
2 "M" dimension does not allow for auxiliary switches.   Allen Bradley 1494U Circuit Breakers

Fits Enclosure Depth		Allen Bradley Type No.	Amp Rating	Fuse Type	Space  Occupied		When  K=8.62	When  K=11.62
8	12				L	M	P	P
•	•	M40	15A to 150A	C-H Westinghouse Circuit Breakers EHD,FD,FDB,FDC,HFD,HMCP	5.00	4.50¹	8.12
								11.12
	•	M50	70A to 250A	C-H Westinghouse Circuit Breakers JD,JDB,JDC,HJD,HMCP	9.75	4.75¹	—
								10.62
	•	M60	100A to 400A	C-H Westinghouse Circuit BreakersKD,KDB,DK,HKD,HMCP	9.69	6.12¹	—
								10.50

1 "M" dimension does not allow for auxiliary switches. 
Charts reference Space Occupied by Disconnect Drawing.

Cutler Hammer

Cutler Hammer C361 Disconnect Switches

Fits Enclosure Depth		Cutler Hammer	Amp			Space Occupied		When  K=8.62	When  K=11.62
8	12	Type Number	Rating	Fuse Clip	Fuse Class	L	M	P	P
•	•	C361NC	30A	No Fuse	—	5.75	7.43	7.31	10.31
•	•	C361SC21	30A	30A-250V	H, K, R	8.38	7.43	7.31	10.31
•	•	C361SC61	30A	60A-250V	H, K, R	8.38	7.43	7.31	10.31
•	•	C361SC61	30A	30A-600V	H, J, K, R	8.38	7.43	7.31	10.31
•	•	C361ND	60A	No Fuse	—	5.75	7.43	7.31	10.31
•	•	C361SD22	60A	60A-250V	H, K, R	8.38	7.43	7.31	10.31
•	•	C361SD22	60A	30A-600V	J	8.38	7.43	7.31	10.31
•	•	C361SD62	60A	30A-600V	H, K, R	8.38	7.43	7.31	10.31
•	•	C361SD62	60A	60A-600V	J	8.38	7.43	7.31	10.31
•	•	C361NE	100A	No Fuse	—	5.56	8.95	7.47	9.91
•	•	C361SE263	100A	100A-250V	H, K, R	10.31	8.95	7.47	9.91
•	•	C361SE263	100A	100A-600V	H, K, R	10.31	8.95	7.47	9.91
•	•	C361SE263	100A	100A-600V	J	10.31	8.95	7.47	9.91
¹ , ²	²	C361NF	200A	No Fuse	—	13.06	10.00	4.94	7.94
¹ , ²	²	C361SF264	200A	200A-250V	H, K, R	13.06	10.00	4.94	7.94
¹ , ²	²	C361SF264	200A	200A-600V	H, J, K, R	13.06	10.00	4.94	7.94

¹ Wire bend space "P" does not allow the use of maximum cable size in 8" deep enclosures.
² 200A switch should be installed in enclosures with an "A" dimension of 30" or greater.  

Cutler Hammer C371 Circuit Breaker Operators (C-H Westinghouse Circuit Breakers)

Fits Enclosure Depth		Allen Bradley Type No.	Amp		Space Occupied		When K=8.62	When K=11.62
8	12		Rating	Fuse Type	L	M	P	P
•	•	C371E	150A	F Frame EHD,FDB,FD,HFD,FDC	6.00	5.50	8.44	11.44
•	•	C371E	150A	F Frame HMCP	6.00	5.50	8.44	11.44
	•	C371F	250A	J Frame JDB,JD,HJD,JDC	8.94	8.00	—	11.25
	•	C371F	250A	J Frame HMCP	10.94	8.00	—	11.25
	•	C371F	400A	K Frame DK,KDB,KD,HKD	9.75	8.00	—	10.75
	•	C371F	400A	K Frame HMCP	9.75	8.00	—	10.75
	•	C371G	600A	L Frame LD,HLD,LDC	8.44	11.88	—	9.18
	•	C371G	600A	L Frame HMCP	8.44	11.88	—	9.18

Charts reference Space Occupied by Disconnect Drawing.

Cutler Hammer Flex-Shaft™ Operator Mechanisms (C-H Westinghouse Circuit Breakers)

Fits Enclosure Depth		Complete Operator			Breaker Height	Breaker Width
8	12	Mechansim	Amp Rating	Fuse Type	"X"	"Y"
•	•	F1S03	150A	F Frame EHD,FDB,FD,HFD,FDC	6.00	4.12
•	•	F1S03	150A	F Frame HMCP	6.00	4.12
•	•	F2S03	250A	J  Frame JDB,JD,HJD,JDC	10.00	4.12
•	•	F2S03	250A	J  Frame HMCP	10.00	4.12
•	•	F3S03	400A	K  Frame DK,KDB,KD,HKD	10.12	5.50
•	•	F3S03	400A	K  Frame HMCP	12.45	5.50
	•	F4S04	600A	L  Frame LD,HLD,LDC	10.75	8.25
	•	F7S04	800A	M Frame MD,MDS	16.00	8.25
	•	F5S04	1200A	N Frame ND,HND,NDC	16.00	8.25
	•	F6S04	2500A	R Frame RD,CRD, RDC	16.00	15.50

Part numbers for Complete Operator Mechanisms include flange mounted handle, flexible shaft and circuit breaker mechanism.
The last digit of the part number denotes the shaft length (F1S03=3' length).

• F,J,K frame Flex-Shafts™ available in 3' to 10' lengths.
• L,N,R frame Flex-Shafts™ available in 4' to 6' lengths.

Space Occupied By Disconnect
1. Flex-Shaft™ System permits circuit breaker locations separate from flange mounted handle mechanism.
2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref “P”) needed for line side conductors.
3. Select shaft length based on location of circuit breaker in the enclosure. Maintain a 4" minimum bending radius for the Flex-Shaft™.
4. Space occupied by circuit breaker is calculated by:

• Overall (Height "X" and Width "Y")
• Minimum wire bend space (manufacturer specified)
• Location "M" from right to left.

Charts reference Space Occupied by Disconnect Drawing.

General Electric 

General Electric Type STDA Disconnect Switches

Fits Enclosure Depth		General Electric  Mechanism For  Switch	Amp  Rating			Space Occupied		When  K=8.62	When  K=11.62
8	12			Fuse Clip	Fuse Class	L	M	P	P
•	•	TDOM1A	30A	No Fuse	—	7.75¹	5.25	9.12	12.12
•	•	TDOM1A	30A	30A-250V	H, R	7.75¹	5.25	9.12	12.12
•	•	TDOM1B	30A	30A-600V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	30A	60A-250V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	30A	60A-600V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1A	60A	No Fuse	—	7.75¹	5.25	9.12	12.12
•	•	TDOM1B	60A	60A-250V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	60A	60A-600V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	60A	100A-250V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	60A	100A-600V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1A	100A	No Fuse	—	7.75¹	5.25	9.12	12.12
•	•	TDOM1B	100A	100A-250V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	100A	100A-600V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	100A	200A-250V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM1B	100A	200A-600V	H, R	12.38¹	5.25	9.12	12.12
•	•	TDOM2	200A	No Fuse	—	7.00	9.12	6.50	9.50
•	•	TDOM2	200A	200A-250V	H, R	15.38	9.12	6.50	9.50
•	•	TDOM2	200A	200A-600V	H, R	15.38	9.12	6.50	9.50

¹ Applies to 8" deep enclosures, and is 0.875" less in 12" deep enclosures.      

General Electric Type STDA Circuit Breaker Operators

Fits Enclosure Depth		General Electric  Mechanism For  Switch	Amp Rating		Space Occupied		When  K=8.62	When  K=11.62
8	12			Fuse Type	L	M	P	P
•	•	SDOM1A	150A	TEB, TED, THED	7.75¹	5.25	9.06	12.06
•	•	SDOM1A	150A	TEC	7.75¹	5.25	9.06	12.06
•	•	TDOM1B	150A	TB1	12.38¹	5.25	9.06	12.06
•	•	TDOM1B	150A	TEC, TECL	12.38¹	5.25	9.06	12.06
•	•	TDOM1C	150A	TEL	7.75¹	5.25	9.06	12.06
•	•	TDOM1D	150A	THLC1	7.75¹	5.25	6.62	9.62
•	•	TDOM3	225A	TFJ	10.38	5.75	7.62	10.62
•	•	TDOM3	225A	TFK, THFK, TFL	10.38	5.75	7.62	10.62
•	•	TDOM4	400A	TJJ, TJK4, THJK4, TJL4V	8.25	9.38	6.69	9.69
•	•	TDOM4	600A	TJK6, THJK6, TJ4V, TJL4V	8.25	9.38	6.69	9.69
•	•	TDOM5	400A	TB4, TJH6S	14.25	9.38	6.69	9.69
•	•	TDOM6	225A	TLB2, THLC2	11.75	9.38	6.12	9.12
•	•	TDOM6	400A	TLB4, THLC4	11.75	9.38	4.75	7.75
•	•	SDOM1A	150A	SPECTRA SE150	7.75¹	5.25	9.06	12.06
•	•	SDOM3	250A	SPECTRA SF250	10.38	5.75	7.06	10.06
	•	SDOM4	600A	SPECTRA SG600	10.00	7.00	—	7.93

¹ Applies to 8" deep enclosures, and is 0.875" less in 12" deep enclosures.
Charts reference Space Occupied by Disconnect Drawing.      

General Electric Circuit Breakers (Spectra-Flex™ Cable Operators)

Fits Enclosure Depth				Circuit Breaker Height	Circuit Breaker Width
C=8	C=12	Frame Size	Max Amp Rating	X	Y
•	•	E150	150A	6.31	4.12
•	•	SE150	150A	6.31	4.12
	•	SF250	250A	10.12	4.12
	•	SG600	600A	10.09	5.50
	•	SK1200	1200A	15.50	8.25

 

Frame Size	Breaker Mechanism	Flange Mounting Handle¹	Operating Cable²
E150	SCOM1A	SCH1	SC3L
SE150/SF250	SCOM1EF	SCH1	SC3L
SG600	SCOM1G	SCH1	SC3L
SK1200	SCOM1K	SCH2K	SC3H

¹ Operating Cables are available 3' to 10' lengths. In the table above, the number "3" in the part number indicates a 3' cable.

1. GE Spectra-Flex™ Operating Cables permit circuit breaker locations separate from flange mounted handle mechanism.
2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref “P”) needed for line side conductors.
3. Select shaft length based on location of circuit breaker in the enclosure. Maintain a 3" minimum bending radius for the Flex-Shaft™.
4. Space occupied by circuit breaker is calculated by:
   • Overall (Height "X" and Width "Y")
   • Minimum wire bend space (manufacturer specified)
   • Location "M" from right to left

Charts reference Space Occupied by Disconnect Drawing.

Siemens I-T-E 

I-T-E - Disconnect Switches (Max-Flex™ Operators)

Fits Enclosure Depth			Amp  Rating			Disconnect Height  "X"	Disconnect Width  "Y"
C=8	C=12	Switch		Fuse Clip	Fuse Class
•	•	MCS603R	30A	No Fuse	—	5.52	6.13
•	•	MCS603R	30A	30A-250V	H,K,R	8.11	6.13
•	•	MCS603R	30A	30A-600V	H,K,R	10.11	6.13
•	•	MCS603R	30A	30A-600V	J	8.48	6.13
•	•	MCS606R	60A	No Fuse	—	5.52	6.13
•	•	MCS606R	60A	60A-250V	H,K,R	7.86	6.13
•	•	MCS606R	60A	60A-600V	H,K,R	10.38	6.13
•	•	MCS606R	60A	60A-600V	J	8.36	6.13
•	•	MCS610R	100A	No Fuse	—	7.59	7.38
•	•	MCS610R	100A	100A-250V	H,K,R	11.85	7.38
•	•	MCS610R	100A	100A-600V	H,K,R	13.85	7.38
•	•	MCS610R	100A	100A-600V	J	10.60	7.38
•	•	MCS620R	200A	No Fuse	—	9.00	9.17
•	•	MCS620R	200A	200A-250V	H,K,R	14.70	9.17
•	•	MCS620R	200A	200A-600V	H,K,R	17.20	9.17
•	•	MCS620R	200A	200A-600V	J	13.32	9.17

Siemens I-T-E Max-Flex™ Operators (Circuit Breakers)

Complete Operator Mechansim		Breaker Frame Size	Circuit Breaker Type	Circuit Breaker Height "X"	Circuit Breaker  Width "Y"
	Amp Rating
FHOE036	125A	ED	ED2,ED4,ED6,HED4,HED6,	6.34	3.00
FHOE036	125A	CED	CED6	9.58	3.00
FHOF036	250A	FD	FXD6-A,FD6-A,HFD6,FXD6-ETJ,HHFD6, HHFXD6	9.50	4.50
FHOF036	250A	CFD	CFD6,CFD6-ETI	14.25	4.50
FHOJ036	400A, 600A	JD, LD	JXD2,LXD6,JD6,LD6,HJD6,HLD6,HHJD6,HHLD6, HHJXD6,HHLXD6,JXD6-ETI,LXD6-ETI	11.00	7.50
FHOJ036	400A, 600A	CJD,CLD	CJD6,CLD6,CJD6-ETI,CLD6-ETI	17.86	7.50
FHOLMO36	800A	LMD	LMD6,LMXD6,HLMD6,HLMDX6,LMXD6-ETI	16.00	9.00

Last three digits of operator mechanism part number denote cable length in inches.
- 48" cables are offered for ED,FD,JD/LD operators

Space Occupied By Disconnect
1. I-T-E Max-Flex™ System permits circuit breaker locations separate from flange mounted handle mechanism.
2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref “P”) needed for line side conductors.
3. See Siemens I-T-E instructions for disconnect location limitations when using 36" or 48" Max-Flex™ cables.
4. Space occupied by circuit breaker is calculated by:

• Overall (Height "X" and Width "Y")
• Minimum wire bend space (manufacturer specified)
• Location "M" from right to left.
• Charts reference Space Occupied by Disconnect Drawing.

Square D

Square D Class 9422 Disconnect Switches

Fits Enclosure Depth			Amp  Rating			Space Occupied		When  K=8.62 P	When  K=11.62 P
8	12	Square D Type Number		Fuse Clip	Fuse Class	L	M
•	•	TCN-30	30A	No Fuse	—	3.80	6.84	7.56	10.56
•	•	TCF-30	30A	30A-250V	H, K, R	5.53	6.84	7.56	10.56
•	•	TCF-33	30A	30A-600V	H, K, R	8.15	6.84	7.56	10.56
•	•	TCF-33	30A	60A-250V	H, K, R	6.15	6.84	7.56	10.56
•	•	TCF-33	30A	30A-600V	J	5.53	6.84	7.56	10.56
•	•	TDN-60	60A	No Fuse	—	3.80	6.84	7.56	10.56
•	•	TDF-60	60A	30A-600V	H, K, R	8.15	6.84	7.56	10.56
•	•	TDF-60	60A	60A-250V	H, K, R	6.15	6.84	7.56	10.56
•	•	TDF-63	60A	60A-600V	H, K, R	8.65	6.84	7.56	10.56
•	•	TDF-63	60A	60A-600V	J	5.53	6.84	7.56	10.56
	•	TEN-10	100A	No Fuse	—	3.80	6.84	7.44	10.44
	•	TEF-10	100A	100A-250V	H, K, R	8.25	6.84	7.44	10.44
	•	TEF-10	100A	100A-600V	H, K, R	10.25	6.84	7.44	10.44
	•	TEF-10	100A	100A-600V	J	7.05	6.84	7.44	10.44
•	•	TC-1	30A	No Fuse	—	5.75	6.00	6.62	9.62
•	•	TC-2	30A	30A-250V	H, K, R	5.75	6.00	6.62	9.62
•	•	TC-3	30A	30A-600V	H, K, R	7.75	6.00	6.62	9.62
•	•	TC-3	30A	60A-250V	H, K, R	5.88	6.00	6.62	9.62
•	•	TC-3	30A	30A-600V	J	5.75	6.00	6.62	9.62
•	•	TD-1	60A	No Fuse	—	6.38	6.62	7.50	10.50
•	•	TD-2	60A	30A-600V	H, K, R	8.50	6.62	7.50	10.50
•	•	TD-2	60A	60A-250V	H, K, R	6.50	6.62	7.50	10.50
•	•	TD-3	60A	60A-600V	H, K, R	9.00	6.62	7.50	10.50
•	•	TD-3	60A	60A-600V	J	6.38	6.62	7.50	10.50
	•	TE-1	100A	No Fuse	—	4.75	8.38	—	10.25
	•	TE-2	100A	100A-250V	H, K, R	7.50	8.38	—	10.25
	•	TE-2	100A	100A-600V	H, K, R	9.50	8.38	—	10.25
	•	TE-2	100A	100A-600V	J	6.25	8.38	—	10.25
	•	TE-3	100A	200A-600V	J	13.75	8.38	—	10.25
	•	TF-1	200A	No Fuse	—	5.50	11.62	—	8.88
	•	TF-2	200A	200A-250V	H, K, R	11.50	11.62	—	8.88
	•	TF-2	200A	200A-600V	H, K, R	14.00	11.62	—	8.88
	•	TF-2	200A	200A-600V	J	10.12	11.62	—	8.88
	•	TF-3	200A	400A-600V	J	14.50	11.62	—	8.88

Square D Class 9422 Variable Depth Operators (Circuit Breakers)

Fits Enclosure Depth		General Electric  Mechanism For  Switch	Amp  Ratingthtd>		Space Occupied		When  K=8.62 P	When  K=11.62 P
8	12			Frame Size	L	M
•	•	RG-1	75A	GJL	3.53	3.74	7.47	10.47
•	•	RG-1	100A	GJL	3.53	3.74	7.47	10.47
•	•	RN-1	100A	FAL,FHL	5.12	5.25	7.62	10.62
•	•	RP-1	250A	KAL,KHL	7.12	5.62	8.38	11.38
	•	RR-1	400A	LAL, LHL, Q4L	7.62	8.75	—	7.00

Charts reference Space Occupied by Disconnect Drawing.

Square D Class 9422 Disconnect Switches (Cable Mechanism 9422-CFT30 and 9422A-1 Handle Mechanism)

Fits Enclosure Depth		Square D Type  Number	Amp  Rating			Disconnect Height  "X"	Disconnect Width "Y"
C=8	C=12			Fuse Clip	Fuse Class
•	•	TCN-30	30A	No Fuse	—	5.90	6.20
•	•	TCF-30	30A	30A-250V	H, K, R	7.50	6.20
•	•	TCF-33	30A	30A-600V	H, K, R	10.15	6.20
•	•	TCF-33	30A	60A-250V	H, K, R	8.15	6.20
•	•	TCF-33	30A	30A-600V	J	7.50	6.20
•	•	TDN-60	60A	No Fuse	—	5.90	6.20
•	•	TDF-60	60A	30A-600V	H, K, R	10.15	6.20
•	•	TDF-60	60A	60A-250V	H, K, R	8.15	6.20
•	•	TDF-63	60A	60A-600V	H, K, R	10.65	6.20
•	•	TDF-63	60A	60A-600V	J	7.50	6.20
	•	TEN-10	100A	No Fuse	—	5.90	6.20
	•	TEF-10	100A	100A-250V	H, K, R	10.35	6.20
	•	TEF-10	100A	100A-600V	H, K, R	12.35	6.20
	•	TEF-10	100A	100A-600V	J	10.35	6.20

Square D Class 9422 Cable Mechanism (Circuit Breakers)

Fits Enclosure Depth			Amp		Circuit Breaker	Circuit Breaker
C=8	C=12	Cable Type Switch	Rating	Frame Type	Height "X"	Width "Y"
•	•	9422 CGJ30	75A	GJL	4.75	3.50
•	•	9422 CEJ30	100A	GJL	4.75	3.50
•	•	9422 CFA30	100A	FAL,FHL	6.00	4.50
•	•	9422 CKA30	250A	KAL,KHL	8.00	4.50
	•	9422 CLA30	400A	LAL,LHL,Q4L	11.00	6.00

Use cable mechanism with circuit breaker and 9422-A1 handle mechanism
Cable operators are offered in 3’, 5’, and 10’ lengths. Last 2 digits of part numbers above (30) are for 3’ cables

Space Occupied By Disconnect Switch
1. Square D Cable System permits circuit breaker locations separate from flange mounted handle mechanism.
2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref "P") needed for line side conductors.
3. Select cable mechanism length based on disconnect location in enclosure. See Square D instructions for minimum cable bend radius.
4. Space occupied by circuit breaker is calculated by:

• Overall (Height "X" and Width "Y")
• Minimum wire bend space (manufacturer specified)

Charts reference Space Occupied by Disconnect Drawing.