Watertight Diecast Aluminum Enclosures 1550Z Series

Key Features:

• Thick-wall diecast aluminum watertight electronic instrument enclosure.
• Rugged, diecast aluminum alloy is tough yet easy to machine.
• Two piece tongue and groove construction for protection against access of dust and water.
• Easy to wallmount using blind thru-box holes (on all sizes except 1550Z102, 1550Z115, and 1550Z120). Access to blind holes is outside of gasket ring to uphold ingress protection.
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
• Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied outside and inside the enclosure.
• Lid is secured with either two, four, or six stainless steel Philips head machine screws, depending on enclosure size.
• Lid screws are outside the gasket protection area to eliminate the need for o-rings.
• Lid screws are self-captivating on six sizes: 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137, and 1550Z139. Lid holes are slightly undersized and threaded with the first installation. 
• Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
• Gasket has a temperature rating of -40°C to +150°C (-40°F to 302°F).
• cUL and UL listed under file #E71073.
• Independently tested to meet IP66, IP67, and IP68 as well as NEMA Type 4, 4X, 12 & 13 ratings.
  • Customers should conduct their own testing to determine suitability for any specific application.
• All sizes except 1550Z101 carry an impact rating of IK08 per IEC62262.
• No internal ribs for easy installation of connectors without interference or additional milling.

---

Accessories

• Breather Kit
• Pressure Compensation Plug
• Small Rainproof Ventilator
• Liquid-Tight Cordgrips (Nylon)
• Liquid-Tight Cordgrips (Nickel Plated Brass)